Klipper LEDHelper Error Fix Tutorial

If you encounter the following error after upgrading Klipper:

You can follow these steps to fix it:

Fix Steps

1. Access SSH: Connect to your Klipper host using SSH.

Ssh Quick Guide

1. Delete the old klipper-led_effect files: Run the following command to delete the old LED effect files:

   sudo rm -rf klipper-led_effect/

2. Clone the latest klipper-led_effect: Use the following command to pull the latest version from GitHub:

   git clone https://github.com/julianschill/klipper-led_effect.git

3. Change to the directory: Navigate to the newly cloned directory:

   cd klipper-led_effect

4. Run the installation script: Execute the installation script to complete the installation:

   ./install-led_effect.sh

5. Restart the firmware: After the installation is complete, return to the Klipper web interface and click FIRMWARE RESTART to reboot the firmware and restore normal connection.

---

I hope this tutorial helps users who need to fix the Klipper LEDHelper error! If you have any other questions or need further assistance, feel free to contact me.