Bill of Materials
CNC Trident AWD BOM
Part Description | Specifications or Color | QTY |
---|---|---|
SIBOOR-42STH48-2504A (S45) Motor | Class H (180℃) | 4 |
CNC_Back_Motor_Shaft_Cover | Standard Color | 2 |
CNC_Front_Motor_Shaft_Cover | Standard Color | 2 |
CNC_Hollow_Bearing_Post_With_Ring | Accent Color | 14 |
CNC_Hollow_Support_Post | Accent Color | 6 |
CNC_Hollow_Idler_Post_With_Ring | Accent Color | 2 |
CNC_Back_Drive_Tensioner_Spacer | Accent Color | 2 |
CNC_Back_Drive_Tensioner | Standard Color | 2 |
CNC_PEI_Limit_Block | Silver | 2 |
CNC_Back_Drive_Frame_Left_Lower | Standard Color | 1 |
CNC_Back_Drive_Frame_Left_Upper | Standard Color | 1 |
CNC_Back_Drive_Frame_Right_Lower | Standard Color | 1 |
CNC_Back_Drive_Frame_Right_Upper | Standard Color | 1 |
CNC_XY_Joint_Left_Lower | Standard Color | 1 |
CNC_XY_Joint_Left_Upper | Standard Color | 1 |
CNC_XY_Joint_Right_Lower | Standard Color | 1 |
CNC_XY_Joint_Right_Upper | Standard Color | 1 |
CNC_Front_Idler_Left_Lower[2WD] | Standard Color | 1 |
CNC_Front_Idler_Left_Upper[2WD] | Standard Color | 1 |
CNC_Front_Idler_Right_Lower[2WD] | Standard Color | 1 |
CNC_Front_Idler_Right_Upper[2WD] | Standard Color | 1 |
CNC_Front_Drive_Left_Lower[AWD] | Standard Color | 1 |
CNC_Front_Drive_Left_Upper[AWD] | Standard Color | 1 |
CNC_Front_Drive_Right_Lower[AWD] | Standard Color | 1 |
CNC_Front_Drive_Right_Upper[AWD] | Standard Color | 1 |
CNC_X_Carriage_Frame_MGN12H_Eddy | Standard Color | 1 |
Stainless_steel_9mm_belt_clamp | / | 2 |
CNC_X_Carriage_Frame_UHF_Extensions | Standard Color | 2 |
M3 Aluminum Alloy Washer | Accent Color | 14 |
Screw List Included in the Kit
Please note that when you buy the Trident JUNE KIT, the screws listed below are packed in the screw box, not inside the CNC AWD KIT. These screws will only be included in the CNC AWD KIT if you purchase the CN Trident AWD KIT separately.
Part Description | Specifications | QTY |
---|---|---|
M3×40_SHCS | Nickel-plated | 18 |
M3×35_SHCS | Nickel-plated | 2 |
M3×45_SHCS | Nickel-plated | 14 |
M5×12_BHCS | Nickel-plated | 24 |
M5×16_BHCS | Nickel-plated | 4 |
M5×14_BHCS | Nickel-plated | 2 |
M3×8_BHCS | Nickel-plated | 8 |
M2×10_SHCS | Nickel-plated | 4 |
M4×20_SHCS | Nickel-plated | 2 |
M3×6_BHCS | Nickel-plated | 6 |
M3×16_BHCS | Nickel-plated | 2 |
M3×8_SHCS | Nickel-plated | 4 |
M5 Flange Aluminum Alloy Lock Nut | Stainless Steel | 6 |
M5 Post-install T-nut | Stainless Steel | 36 |
M3 Aluminum Alloy Washer | Accent Color | 14 |
For self-provided components
If you only purchase the CNC Trident AWD Kit, you will need to buy additional drive components separately. Please note that the AWD gantry has high requirements for drive parts, so it’s recommended to choose high-quality bearings, pulleys, and belts.
For the belts, you can use either 2GT or 2MGT. The approximate lengths are:
1.9 meters for the 250 model
2.1 meters for the 300 model
2.4 meters for the 350 model
Part Description | QTY |
---|---|
GT2 20T Timing Pulley (5mm Bore, 9mm Wide) | 4 |
GT2 20T Idler Pulley (5mm Bore, 9mm Wide) | 2 |
F695ZZ Flanged Bearing | 28 |
695ZZ Bearing | 14 |
2MGT 9mm Wide Open Loop Timing Belt | 1 |
"Driver (e.g., TMC2209/TMC2240, etc.)" | 2 |
Last updated