FAQ（Oct 14 update）

※Solution to the Issue of Unable to Save the Cartographer Model

2024/9/21

In the previous configuration, due to formatting issues, the newly saved calibration data could not be properly applied. Even after calibrating the cartographer model, the Z-axis could not home correctly. Additionally, the extruder motor direction has been reversed.

For users who are using the old configuration, please manually adjust the extruder motor direction by removing the exclamation mark from the dir_pin line in the [extruder] section. Here’s what to change:

Before:

step_pin: EBBCan:gpio18              # Step pin
dir_pin: !EBBCan:gpio19               # Direction pin, "!" indicates logic inversion

After:

step_pin: EBBCan:gpio18              # Step pin
dir_pin: EBBCan:gpio19               # Direction pin

To fix the formatting issue, ensure that the section appears as follows, inserting a line before the [bed_mesh default] section:

Before:

#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*# [bed_mesh default]

After:

#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [bed_mesh default]

Make sure to save the changes and restart the machine to apply the updates.

---

※Upgrade Cartographer Software

How to Update Cartographer Software in SIBOOR Kit and Switch Source to GitHub

Here’s the tutorial in English for updating the Cartographer software in the SIBOOR Kit. If you encounter issues like upgrade failures, you can try switching the source to GitHub:

1. Remove the local repository:

   rm -rf cartographer-klipper/

   This step will delete the local Cartographer repository, allowing you to pull the latest version.

2. Clone the latest repository:

   cd ~
   git clone https://github.com/Cartographer3D/cartographer-klipper.git

3. Set the installation script permissions and execute the installation:

   chmod +x cartographer-klipper/install.sh
   ./cartographer-klipper/install.sh

4. Check the Moonraker configuration file:

   Open the moonraker.conf file, find the [update_manager cartographer] section, and check the source for automatic updates. If it is not from GitHub, update it as follows:

   • Old configuration:

     [update_manager cartographer]
     type: git_repo
     path: ~/cartographer-klipper
     channel: dev
     origin: https://gitee.com/NBTP/cartographer-klipper.git
     env: ~/klippy-env/bin/python
     requirements: requirements.txt
     install_script: install.sh
     is_system_service: False
     managed_services: klipper
     info_tags:
       desc=Cartographer Probe (Gitee)

   • New configuration:

     [update_manager cartographer]
     type: git_repo
     path: ~/cartographer-klipper
     channel: dev
     origin: https://github.com/Cartographer3D/cartographer-klipper.git
     env: ~/klippy-env/bin/python
     requirements: requirements.txt
     install_script: install.sh
     is_system_service: False
     managed_services: klipper
     info_tags:
       desc=Cartographer Probe

5. Save and close the file, then restart the relevant services to apply the changes.

This ensures that the Cartographer software source is pointing to GitHub, potentially resolving upgrade issues.