RGB PCB LIRHT

Here’s the English translation:

---

Download Link for Fasteners: https://github.com/VoronDesign/Voron-Hardware/tree/master/Daylight/STL

Klipper Configuration Instructions for GRBW LED Strips In the printer.cfg file of Klipper, locate or create a [neopixel] section. In this section, add the following configuration:

[neopixel my_neopixel] # Use English brackets to enable this definition
pin: <Your GPIO Pin> # Mainboard pin definition
chain_count: 40 # Number of LEDs
color_order: GRB # Color order
initial_RED: 0.2 # Default value for red light at startup, maximum is 1
initial_GREEN: 0.2 # Default value for green light at startup, maximum is 1
initial_BLUE: 0.2 # Default value for blue light at startup, maximum is 1

---

Please replace <Your GPIO Pin> with the actual GPIO pin connected to the LED strip. In the chain_count field, enter the number of LEDs based on the LED strip you purchased (10 or 18). Save the file and restart the Klipper service to apply the changes. This way, you can configure it according to the type of LED strip you purchased.

Translation: "For more usage tutorials, such as breathing lights, see here:"

https://github.com/julianschill/klipper-led_effect/blob/master/docs/LED_Effect.md